Description
Akiles WireMac-E Electric Double Wire Punch & Binding Machine
The Akiles WireMac-E Electric Wire Punch with manual wire closer is a heavy-duty, professional-grade wire binding machine engineered for long-term, high-volume use. Designed for commercial environments, this electric double wire punch delivers consistent, precise results while reducing operator fatigue.
The robust electric punching mechanism allows the WireMac-E to punch up to 20 sheets of 20 lb paper per cycle. A convenient reverse switch helps clear jams quickly, minimizing downtime in busy production environments.
With a full 14″ punching width and open throat design, the WireMac-E accommodates standard and oversized documents with ease.
📊 Compare all Wiremac models here.
Precision Punching & Professional Control
All 40 punch pins are fully disengageable, allowing users to eliminate partially punched holes and ensure a clean, centered punch on any document size.
The built-in manual wire closer provides accurate binding control based on wire diameter.
3:1 Model (31) binds from 3/16″ to 9/16″
2:1 Model (21) binds from 5/8″ to 1-1/4″
This flexibility allows the WireMac-E to handle both thinner presentations and thicker documents.
Compatible Supplies
The WireMac-E electric double wire punch works with standard twin loop / double wire binding supplies, depending on the pitch model selected (3:1 or 2:1).
✅ Technical Specifications
Brand: Akiles
Model: WireMac-E
Punch Type: Electric
Pitch Options: 3:1 (31 Model) or 2:1 (21 Model)
Punch Capacity: Up to 20 sheets (20 lb paper)
Punch Width: 14″ open throat
Binding Capacity (3:1 Model): 3/16″ – 9/16″
Binding Capacity (2:1 Model): 5/8″ – 1-1/4″
Punch Pins: 40 fully disengageable
Jam Control: Reverse switch
Recommended Use: Commercial / high-volume environments
Compatible Supplies: Standard double wire / twin loop wire
FAQ: Frequently Asked Questions: Akiles WireMac-E
What is the difference between the WireMac E 3:1 and 2:1 models?
The WireMac E 3:1 (31 Model) is designed for smaller documents, using three holes per inch. it is compatible with 3:1 pitch double loop wire from 3/16″ to 9/16″. The WireMac-E 2:1 (21 Model) uses two holes per inch and is meant for larger books, compatible with 2:1 pitch wire from 5/8″ up to 1-1/4″.
Does the WireMac E Electric Power punch require a separate wire closer?
No. The Akiles WireMac-E features a built-in heavy-duty manual wire closer located at the top of the machine. This allows you to punch your pages electrically and then move them to the closer to finish the document on a single workstation.
Can I punch non-standard paper sizes?
Yes. With 40 fully disengageable pins, the WireMac-E Punch allows you to stop any specific pin from punching. This is essential for professional finishing on legal-sized documents or custom-sized covers where you want to avoid a “half-hole” at the edge of the paper.
Is this machine suitable for high-volume commercial use?
Absolutely. The WireMac E Puncher is a “Commercial Grade” unit. Its all-metal construction and high-torque motor are designed for print shops and corporate offices that need to punch hundreds of documents daily without the motor overheating or the dies dulling.
What happens if the machine jams?
The WireMac E Electric includes a convenient built-in reverse switch. If you accidentally insert too many sheets (beyond the 20-sheet limit), simply flip the switch to reverse the punching pins and clear the jam safely without damaging the internal mechanisms.
